ELECTRIC PTO CLUTCH ASSEMBLY

Please note: Product photos are for illustration purposes only and the actual product may differ from that shown.

CLL5691

ELECTRIC PTO CLUTCH ASSEMBLY

Brand: GA SPARES - GA
Qty:

Extended Description

  • Description: Electric PTO Clutch Assembly
  • Replaces OEM: Massey Ferguson:917-04163A
  • MTD & Cub Cadet 717-04163, 917-04163
  • Warner: 5217-32, 5217-43
  • Rover: 917-04163A
  • Inside Diameter: (inches) 1
  • Inside Diameter: (mm) 25
  • Pulley Diameter : (inches) 6
  • Pulley Diameter : (mm) 152
  • Fits: Cub Cadet 42" cut LT1042 13AP11CH630 Hydro 23hp (2005), LT1042 13AX11CG630 Hydro 19hp (2005), LT1042 13AX11CG630 Hydro 19hp (2006) models, LT1042 13AX11CG630 Hydro 19hp (2008), LTX1042 13AX91AG330 Hydro 19hp (2009) models.
  • Fits: Cub Cadet 46" cut LT1046 13AP11CH630 Hydro 23hp (2008) models.
  • Fits: Massey Ferguson 96cm (38" cut) MF 38-15SD 13AV91CF395 (2010, 2011) models.
  • Fits: Massey Ferguson 106cm (42" cut) MF 42-20SD 13AP91CS395 (2010, 2011 & 2012), MF42-20SD 13BP91CS395 (2012) models.
  • Fits: MTD Yardman 42" cut 13AP604G671 Autodrive 20hp (2006 & 2008) electric PTO models, 13AP90YG371 Autodrive 20hp (2009) models, 13AV604G371 Autodrive 16hp (2008) models, 13AV604G671 Autodrive 16hp (2008) models, 13AV604G671 Autodrive 20hp (2006) electric PTO models, 13AV90YG371 Autodrive 16hp (2009) models
  • Fits: MTD Yardman 46" cut 13AP604H671 Autodrive 23hp (2007) model (Note: this model used two different clutches, please check your clutch carefully before ordering)
  • Fits: Rover Rancher 20/42 Hydrostatic 2010 models and 17/42 Autodrive 2010 models.
  • Features: Manufactured by an OEM supplier. Operates in a counterclockwise direction.
  • Standard Pack Quantity: 1
  • Footnote: Use with "B" section, 69 series belt.
  • Please Note: IMPORTANT INFORMATION ON ELECTRIC CLUTCHES
  • Over the counter sales of clutches as spare parts should be discouraged.
  • WHY? - The main causes of failures to electric clutches are due to faults with the
  • battery and/or charging circuits not providing the correct current to operate the
  • clutch adequately leading to premature failure. Electric PTO clutches are a
  • specialist component that should only be fitted by a servicing dealer with the
  • correct equipment to test both the charging circuits and battery condition. It is
  • therefore the responsibility of the servicing dealer to test these items prior to
  • installing a new clutch. Failure to do so will void warranty. Warranty covers
  • normal use and does not cover damage or defect which results from alteration,
  • accident, neglect, or improper clutch selection, installation, operation, or
  • maintenance. Warranty covers faulty manufacture and/or workmanship.
  • GA Spares stocks electric clutches manufactured by an OEM supplier.
  • Brand: MTD - Non Genuine, Cub Cadet - Non Genuine, Rover - Non Genuine, Warner
  • Product Line: Clutch, electric,

Copyright © Roy Gripske & Sons Pty. Ltd. 2013~2024. All Rights Reserved.

Extended Description by Producty

  • Description:
  • Non-Genuine
  • Cub Cadet,
  • Massey Ferguson,
  • MTD,
  • Rover,
  • Warner,
  • Electric PTO Clutch Assembly

  • Features:
    • Manufactured by an OEM supplier
  • • 1" (25.4 mm) I.D Keyed Hub
  • • 6" (152.4 mm) O.D Precision machined pulley
  • • 80 ft. lbs. torque
  • • Suitable for use with 1/2" ("A" or 68 series) or 5/8” (“B” or 69 series) belts
  • • Operates in a counter-clockwise direction (when viewed from the pulley side of the clutch)
  • • Uses cool coil technology
  • • High temperature bearings
  • • Replaceable pulley bearing
  • • Integrated, water tight wiring harness

  • Cub Cadet

  • Fits: 42" (1067 mm) cut Cub Cadet LT1042 (model 13AP11CH630 with 23 hp engine and Hydrostatic transmission year 2005 and model 13AX11CG630 with 19 hp engine and Hydrostatic transmission years 2005 to 2006 and 2008) and LTX1042 (model 13AX91AG330 with 19 hp engine and Hydrostatic transmission year 2009) ride-on lawn mower models.
  • Fits: 46" (1168 mm) cut Cub Cadet LT1046 (model 13AP11CH630 with 23 hp engine and Hydrostatic transmission year 2008) ride-on lawn mower models.
  • Replaces OEM: 717-04163, 717-04163A, 917-04163, 917-04163A

  • Massey Ferguson

  • Fits: 38" (965 mm) cut Massey Ferguson MF 38-15SD (model 13AV91CF395 years 2010 to 2011) ride-on lawn mower models.
  • Fits: 42" (1067 mm) cut Massey Ferguson MF 42-20SD (model 13AP91CS395 years 2010 to 2012 and model 13BP91CS395 year 2012) ride-on lawn mower models.
  • Replaces OEM: 717-04163, 717-04163A, 917-04163, 917-04163A

  • MTD

  • Fits: 42" (1067 mm) cut MTD Yard-Man model 13AP604G671 (20 hp electric PTO models with Autodrive transmission years 2006 and 2008), model 13AP90YG371 (20 hp models with Autodrive transmission year 2009), model 13AV604G371 (16 hp models with Autodrive transmission year 2008), model 13AV604G671 (16 hp models with Autodrive transmission year 2008), model 13AV604G671 (20 hp electric PTO models with Autodrive transmission year 2006) , model 13AV90YG371 (16 hp models with Autodrive transmission year 2009) ride-on lawn mower models.
  • Fits: 46" (1168 mm) cut MTD Yard-Man model 13AP604H671 (23 hp with Autodrive transmission year 2007) Please Note: this model used two different clutches, please check your clutch carefully before ordering.
  • Replaces OEM: 717-04163, 717-04163A, 917-04163, 917-04163A

  • Rover

  • Fits: 42" (1067 mm) cut Rover Rancher 1742 [17/42] (model 13AV90KS333 with Autodrive transmission year 2010) and Rancher 2042 [20/42] (model 13AP91KS333 with Hydrostatic transmission year 2010) ride-on lawn mower models.
  • Replaces OEM: 717-04163, 717-04163A, 917-04163, 917-04163A

  • Warner

  • Replaces OEM: 5217-32, 5217-43

  • Inside Diameter: 1", 25.4 mm
  • Pulley Diameter: 6", 152.4 mm

  • Standard Pack Quantity: 1

Copyright © Roy Gripske & Sons Pty. Ltd. 2013~2024. All Rights Reserved.

Copyright © Roy Gripske & Sons Pty. Ltd. 2013~2024. All Rights Reserved.

All original equipment manufacturers‘ names and part numbers and photographs or drawings of their products are used for identification purposes only, and unless otherwise expressly stated our products are not original equipment manufacturers parts. Unless specifically stated otherwise, we do not hold ourselves out to have any connection, association with or the sponsorship of any original equipment manufacturers and nor do we hold that any of our products have any approval of original equipment manufacturers.