Please note: Product photos are for illustration purposes only and the actual product may differ from that shown.
ELECTRIC PTO CLUTCH ASSEMBLY
1" ID X 5-3/8" PULLEY
Extended Description
- Description: Electric PTO Clutch Assembly
- Replaces OEM: Cub Cadet: 138412
- John Deere: AM122969, AM100979, AM115090, AM118969
- Murray: 326108, 326108MA
- Warner: 5215-53, 5215-7
- Inside Diameter: (inches) 1
- Inside Diameter: (mm) 25.4
- Height: (inches) 3 5/8
- Height: (mm) 92
- Pulley Diameter : (inches) 5 3/8
- Pulley Diameter : (mm) 136
- Fits: John Deere 108, 111, 111H, 112L, 116, 130, 160, 165, 170, 175, GS25, GS30, GS45, LX172, LX173, LX176, LX178, LX186, LX188, STX30, STX38 (Yellow Deck models).
- Fits: Selected Murray & Cub Cadet Ride-ons using B section belts.
- Features: Uses 5/8" belt ("B" or 69 Series Belt) Operates in a counter-clockwise direction.
- Standard Pack Quantity: 1
- Please Note: IMPORTANT INFORMATION ON ELECTRIC CLUTCHES
- Over the counter sales of clutches as spare parts should be discouraged.
- WHY? - The main causes of failures to electric clutches are due to faults with the
- battery and/or charging circuits not providing the correct current to operate the
- clutch adequately leading to premature failure. Electric PTO clutches are a
- specialist component that should only be fitted by a servicing dealer with the
- correct equipment to test both the charging circuits and battery condition. It is
- therefore the responsibility of the servicing dealer to test these items prior to
- installing a new clutch. Failure to do so will void warranty. Warranty covers
- normal use and does not cover damage or defect which results from alteration,
- accident, neglect, or improper clutch selection, installation, operation, or
- maintenance. Warranty covers faulty manufacture and/or workmanship.
- GA Spares stocks electric clutches manufactured by an OEM supplier.
- Brand: Cub Cadet - Non Genuine, John Deere - Non Genuine, Murray - Non Genuine, Warner
- Product Line: Electric, clutch,
Copyright © Roy Gripske & Sons Pty. Ltd. 2013~2024. All Rights Reserved.
Extended Description by Producty
- Description:
- Non-Genuine
- Cub Cadet,
- John Deere,
- Murray,
- Warner,
- Electric PTO Clutch Assembly
- Features:
• Manufactured by an OEM supplier - • 1" (25.4 mm) I.D Hub
- • 5.33" (135.382 mm) O.D Precision machined pulley
- • 105 ft. lbs. torque
- • Suitable for use with 1/2" ("A" or 68 series) or 5/8” (“B” or 69 series) belts
- • Operates in a counter-clockwise direction (when viewed from the pulley side of the clutch)
- • Uses cool coil technology
- • High temperature bearings
- • Replaceable pulley bearing
- • Integrated, water tight wiring harness
Cub Cadet
- Fits: Cub Cadet selected ride-on lawn mower models.
- Replaces OEM: 138412
John Deere
- Fits: John Deere selected ride-on lawn mower models including but not limited to 108, 111, 111H, 112L, 116, 130, 160, 165, 170, 175, GS25, GS30, GS45, LX172, LX173, LX176, LX178, LX186, LX188, STX30 and STX38 (Yellow Deck) models.
- Replaces OEM: AM100979, AM115090, AM118969, AM122969
Murray
- Fits: Murray selected ride-on lawn mower models.
- Replaces OEM: 326108, 326108MA
Warner
- Replaces OEM: 5215-7, 5215-53
- Height: 3 5/8", 92.075 mm
- Inside Diameter: 1", 25.4 mm
- Pulley Diameter: 5.33", 135.382 mm
- Standard Pack Quantity: 1
Copyright © Roy Gripske & Sons Pty. Ltd. 2013~2024. All Rights Reserved.
Copyright © Roy Gripske & Sons Pty. Ltd. 2013~2024. All Rights Reserved.
All original equipment manufacturers‘ names and part numbers and photographs or drawings of their products are used for identification purposes only, and unless otherwise expressly stated our products are not original equipment manufacturers parts. Unless specifically stated otherwise, we do not hold ourselves out to have any connection, association with or the sponsorship of any original equipment manufacturers and nor do we hold that any of our products have any approval of original equipment manufacturers.