Please note: Product photos are for illustration purposes only and the actual product may differ from that shown.
ELECTRIC PTO CLUTCH ASSEMBLY
1" ID X 5.345" PULLEY
Extended Description
- Description: Electric PTO Clutch Assembly
- Replaces OEM: Jacobsen: 990947
- Toro: 99-8012
- Warner: 5215-59, 5210-3
- King Cat: 232201
- Cox: 232201
- Cub Cadet: 917-3497
- MTD: 917-3497
- Simplicity: 1703816
- Snapper: 16343
- Inside Diameter: (inches) 1
- Inside Diameter: (mm) 25.4
- Height: (inches) 3 1/2
- Height: (mm) 89
- Pulley Diameter : (inches) 5.345
- Pulley Diameter : (mm) 136
- Fits: Cox New Generation 18hp 40" cut Models
- Fits: Selected Jacobson, Toro, King Cat, Cub Cadet, MTD, Simplicity and Snapper Ride-ons.
- Fits: Selected Graden 36" & 42" cut models.
- Fits: Cub Cadet 38", 44" & 46" cut 1330 Hydro 13hp 133-233F100 (1993) models, 1720 Hydro 17hp 130-272 100 (1990 & 1991) models, 1730 Hydro 17hp 132-273-100 (1992) models, 1730 Hydro 17hp 133-273-100 (1993) models.
- Features: Manufactured by an OEM supplier. Uses 5/8" V belt "B" or 69 series Operates in a clockwise direction.
- Please Note: IMPORTANT INFORMATION ON ELECTRIC CLUTCHES
- Over the counter sales of clutches as spare parts should be discouraged.
- WHY? - The main causes of failures to electric clutches are due to faults with the
- battery and/or charging circuits not providing the correct current to operate the
- clutch adequately leading to premature failure. Electric PTO clutches are a
- specialist component that should only be fitted by a servicing dealer with the
- correct equipment to test both the charging circuits and battery condition. It is
- therefore the responsibility of the servicing dealer to test these items prior to
- installing a new clutch. Failure to do so will void warranty. Warranty covers
- normal use and does not cover damage or defect which results from alteration,
- accident, neglect, or improper clutch selection, installation, operation, or
- maintenance. Warranty covers faulty manufacture and/or workmanship.
- GA Spares stocks electric clutches manufactured by an OEM supplier.
- Brand: Graden - Non Genuine, Jacobsen - Non Genuine, Toro - Non Genuine, Warner, King Cat - Non Genuine, Cox - Non Genuine, Cub Cadet - Non Genuine, MTD - Non Genuine, Simplicity - Non Genuine, Snapper - Non Genuine,
- Product Line: Electric, clutch,
Copyright © Roy Gripske & Sons Pty. Ltd. 2013~2026. All Rights Reserved.
Extended Description by Producty
- Description:
- Non-Genuine
- Cox,
- Cub Cadet,
- Graden,
- Jacobsen,
- King Cat,
- MTD,
- Simplicity,
- Snapper,
- Toro,
- Warner,
- Electric PTO Clutch Assembly
- Features:
• Manufactured by an OEM supplier - • 1" (25.4 mm) I.D Hub
- • 5.33" (135.382 mm) O.D Precision machined pulley
- • 105 ft. lbs. torque
- • Suitable for use with 1/2" ("A" or 68 series) or 5/8” (“B” or 69 series) belts
- • Operates in a counter-clockwise direction (when viewed from the pulley side of the clutch)
- • Uses cool coil technology
- • High temperature bearings
- • Replaceable pulley bearing
- • Integrated, water tight wiring harness
Cox
- Fits: 40" (1016 mm) cut Cox New Generation 18 hp ride-on lawn mower models.
- Replaces OEM: 232201
Cub Cadet
- Fits: 38" (965 mm), 44" (1118 mm) and 46" (1168 mm) cut Cub Cadet 1330 (13 hp Hydro model 133-233F100 year 1993), 1720 (17 hp Hydro model 130-272 100 years 1990 to 1991), 1730 (17 hp Hydro model 132-273-100 years 1992 to 1993) ride-on lawn mower models.
- Replaces OEM: 917-3497
Graden
- Fits: 36" (914 mm) and 42" (1067 mm) cut Graden selected models.
Jacobsen
- Fits: Jacobsen selected models.
- Replaces OEM: 990947
King Cat
- Fits: King Cat selected ride-on lawn mower models.
- Replaces OEM: 232201
MTD
- Fits: MTD selected ride-on lawn mower models.
- Replaces OEM: 917-3497
Simplicity
- Fits: Simplicity selected ride-on lawn mower models.
- Replaces OEM: 1703816
Snapper
- Fits: Snapper selected ride-on lawn mower models.
- Replaces OEM: 1-6343
Toro
- Fits: Toro selected models.
- Replaces OEM: 99-8012
Warner
- Replaces OEM: 5210-3, 5215-59
- Height: 3 1/2", 88.9 mm
- Inside Diameter: 1", 25.4 mm
- Pulley Diameter: 5.33", 135.382 mm
- Standard Pack Quantity: 1
Copyright © Roy Gripske & Sons Pty. Ltd. 2013~2026. All Rights Reserved.
