Please note: Product photos are for illustration purposes only and the actual product may differ from that shown.
JAS8462
BLADE WASHER JOHN DEERE
SUITS JAS7532
Extended Description
- Description: Non-Genuine John Deere Blade Washer 5/8" Hole, Suits Our JAS7532- Please Refer To
- Notes
- Replaces OEM: John Deere M149625
- Centre Hole Type: Round 5/8" (15.875 mm)
- Deck (cm) 91.5 cm, 96.5 cm, 106.7 cm & 122 cm Cut
- Deck (inches) 36", 38", 42" & 48" Cut
- Deck (mm) 915 mm, 965 mm, 1067 mm & 1220 mm Cut
- Inside Diameter: (inches) 5/8"
- Inside Diameter: (mm) 15.875 mm
- Outside Diameter: (inches) 1.748"
- Outside Diameter: (mm) 44.40 mm
- Fits: 36" (915 mm) cut John Deere X100 Series X115R and X135R ride -on lawn mower models
- - 2 required for 36" cut.
- Fits: 38" (1067 mm) cut John Deere X300 ride -on lawn mower models - 2 required for 38"
- cut.
- Fits: 42" (1067 mm) cut John Deere 100 Series 102, 115, 125, D100, D105, D110, D120,
- D125, D130, E100, E110, E120, E130, LA100, LA105, LA115, LA125, S240 Sport, X155R,
- X300, X304, X310, X350 and X350R ride -on lawn mower models and EZtrak Z225 and
- Z235 zero turn radius (ZTR) ride-on models - 2 required for 42" cut.
- Fits: 48" (1220 mm) cut John Deere 100 Series 145, 155C, D140, E140, L120, L130 and LA145
- ride -on lawn mower models and Z255 EZtrak zero turn radius (ZTR) ride-on models -
- 3 required for 48" cut.
- Features: 5/8" (15.875 mm) hole.
- Standard Pack Quantity: 1
- Please Note: Suitable for use with our spindle assembly JAS7532 (replaces OEM's GY20454,
- GY20962, GY21098) - This is the late model spindle housing
- with 5/8" ‑ 18 thread on the spindle shaft at the blade mounting end as used on
- models with a serial number 015481 onwards. Note: Early models spindle assemblies
- (serial number 015480 and before) had a 12 mm thread.
- Brand: John Deere Non-Genuine,
- Product Line: Blade Mounting Washer, Washer - Blade Mounting,
Copyright © Roy Gripske & Sons Pty. Ltd. 2013~2026. All Rights Reserved.
Extended Description by Producty
- Description:
- Non-Genuine
- John Deere,
- Blade Washer 5/8" Hole, Suits Our JAS7532- Please Refer To Notes
John Deere
- Fits: 36" (915 mm) cut John Deere X100 Series X115R and X135R ride -on lawn mower models - 2 required for 36" cut.
- Fits: 38" (1067 mm) cut John Deere X300 ride -on lawn mower models - 2 required for 38" cut.
- Fits: 42" (1067 mm) cut John Deere 100 Series 102, 115, 125, D100, D105, D110, D120, D125, D130, E100, E110, E120, E130, LA100, LA105, LA115, LA125, S240 Sport, X155R, X300, X304, X310, X350 and X350R ride -on lawn mower models and EZtrak Z225 and Z235 zero turn radius (ZTR) ride-on models - 2 required for 42" cut.
- Fits: 48" (1220 mm) cut John Deere 100 Series 145, 155C, D140, E140, L120, L130 and LA145 ride -on lawn mower models and Z255 EZtrak zero turn radius (ZTR) ride-on models - 3 required for 48" cut.
- Replaces OEM: M149625
- Deck Size: 36", 38", 42" & 48" Cut, 915 mm, 965 mm, 1067 mm & 1220 mm Cut, 91.5 cm, 96.5 cm, 106.7 cm & 122 cm Cut
- Inside Diameter: 5/8", 15.875 mm
- Outside Diameter: 1.748", 44.40 mm
- Centre Hole Type: Round
- Standard Pack Quantity: 1
- Please Note: Suitable for use with our spindle assembly JAS7532 (replaces OEM's GY20454, GY20962, GY21098) - This is the late model spindle housing with 5/8" - 18 thread on the spindle shaft at the blade mounting end as used on models with a serial number 015481 onwards.
- Note: Early models spindle assemblies (serial number 015480 and before) had a 12 mm thread.
Copyright © Roy Gripske & Sons Pty. Ltd. 2013~2026. All Rights Reserved.
